 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Ordering number : ENN7368A CPH3323 CPH3323 Features * Low ON-resistance. * Ultrahigh-speed switching. * 4V drive. P-Channel Silicon MOSFET Ultrahigh-Speed Switching Applications Specifications Absolute Maximum Ratings at Ta=25C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Drain Current (DC) Drain Current (Pulse) Allowable Power Dissipation Channel Temperature Storage Temperature Symbol VDSS VGSS ID IDP PD Tch Tstg PW10s, duty cycle1% Mounted on a ceramic board (900mm2!0.8mm) Conditions Ratings --60 20 --1 --4 1 150 --55 to +150 Unit V V A A W C C Electrical Characteristics at Ta=25C Parameter Drain-to-Source Breakdown Voltage Zero-Gate Voltage Drain Current Gate-to-Source Leakage Current Cutoff Voltage Forward Transfer Admittance Static Drain-to-Source On-State Resistance Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall Time Symbol V(BR)DSS IDSS IGSS VGS(off) yfs RDS(on)1 RDS(on)2 Ciss Coss Crss td(on) tr td(off) tf Conditions ID=--1mA, VGS=0 VDS=-60V, VGS=0 VGS=16V, VDS=0 VDS=-10V, ID=--1mA VDS=-10V, ID=-0.5A ID=--0.5A, VGS=-10V ID=--0.5A, VGS=-4V VDS=-20V, f=1MHz VDS=-20V, f=1MHz VDS=-20V, f=1MHz See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. Ratings min --60 --1 10 --1.2 0.6 1.2 0.58 0.78 180 15 11 8 3 30 25 0.76 1.1 --2.6 typ max Unit V A A V S pF pF pF ns ns ns ns Marking : JY Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 62504 TS IM / 90503 TS IM TA-100518 No.7368-1/4 CPH3323 Continued from preceding page. Parameter Total Gate Charge Gate-to-Source Charge Gate-to-Drain "Miller" Charge Diode Forward Voltage Symbol Qg Qgs Qgd VSD Conditions VDS=--30V, VGS=-10V, ID=--1A VDS=--30V, VGS=-10V, ID=--1A VDS=--30V, VGS=-10V, ID=--1A IS=--1A, VGS=0 Ratings min typ 5.0 0.8 0.8 --0.89 --1.2 max Unit nC nC nC V Package Dimensions unit : mm 2152A Switching Time Test Circuit VIN 0V --10V 0.4 2.9 VDD= --30V 0.2 0.15 VIN ID= --0.5A RL=60 0.6 3 D 0.05 VOUT 1.6 2.8 PW=10s D.C.1% G 1 1.9 2 0.6 1 : Gate 2 : Source 3 : Drain SANYO : CPH3 0.2 CPH3323 P.G 50 S 0.7 0.9 6.0 V --0.9 --1.8 --1.6 .0V 8.0V --0.8 Drain Current, ID -- A Drain Current, ID -- A --0.7 --0.6 --0.5 --0.4 --0.3 --0.2 --0.1 0 0 --0.2 3.0 V --1.4 --1.2 --1.0 --0.8 10 --0.2 0 --0.4 --0.6 --0.8 --1.0 IT05476 1500 0 --0.5 --1.0 --1.5 --2.0 Ta= 7 --0.4 5C 25 --25 C C VGS=2.5V --0.6 --2.5 --3.0 --3.5 Drain-to-Source Voltage, VDS -- V 1500 RDS(on) -- VGS Gate-to-Source Voltage, VGS -- V IT05477 RDS(on) -- Ta Static Drain-to-Source On-State Resistance, RDS(on) -- m Static Drain-to-Source On-State Resistance, RDS(on) -- m 1400 1300 1200 1100 1000 900 800 700 600 500 400 300 0 --2 --4 --6 --8 --10 --12 --14 Ta=25C ID= --0.5A 1400 1300 1200 1100 1000 900 800 700 600 500 400 300 200 100 --60 0. I D= 5 VG A, 4V S= =10 GS V 0 I D= ,V .5A --16 --18 --20 --40 --20 0 20 40 60 80 100 120 Gate-to-Source Voltage, VGS -- V IT05478 Ambient Temperature, Ta -- C IT05479 No.7368-2/4 25 --4.0 140 4. 5V V 4.0 V 3.5 VDS=10V Ta= --25 C 75C --1.0 ID -- VDS --2.0 ID -- VGS C CPH3323 5 yfs -- ID VDS= --10V 5 3 2 IF -- VSD VGS=0 Forward Transfer Admittance, yfs -- S 3 Forward Current, IF -- A 2 2 1.0 7 5 C 5 --1.0 7 5 3 2 --0.1 7 5 3 2 -25 =C Ta 75 C 2 0.1 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 --0.01 --0.2 --0.4 --0.6 --25C --0.8 3 Ta=7 5C 25C --1.0 --1.2 IT05481 Drain Current, ID -- A 100 7 5 IT05480 1000 7 5 3 SW Time -- ID Ciss, Coss, Crss -- VDS f=1MHz Diode Forward Voltage, VSD -- V VDD= --30V VGS= --10V td(off) Switching Time, SW Time -- ns Ciss, Coss, Crss -- pF 3 2 tf 2 100 7 5 3 2 10 7 5 3 Ciss 10 7 5 3 2 td(on) tr Coss Crss 1.0 --0.1 2 3 5 7 --1.0 2 3 IT05482 --10 7 5 3 2 0 --5 --10 --15 --20 --25 --30 IT05483 Drain Current, ID -- A --10 VGS -- Qg Drain-to-Source Voltage, VDS -- V ASO Gate-to-Source Voltage, VGS -- V VDS= --30V ID= --1A --8 IDP= --4A 10 <10s 10 s 0 1m Drain Current, ID -- A --6 --1.0 7 5 3 2 --0.1 7 5 3 2 ID= --1A s s m 10 0m s DC op er ati on --4 25 a= (T ) C --2 Operation in this area is limited by RDS(on). 0 0 1 2 3 4 5 6 IT05484 --0.01 --0.01 2 3 Ta=25C Single pulse Mounted on a ceramic board (900mm2!0.8mm) 5 7--0.1 2 3 5 7--1.0 23 5 7 --10 23 Total Gate Charge, Qg -- nC 1.2 PD -- Ta Drain-to-Source Voltage, VDS -- V 5 7--100 IT05485 Allowable Power Dissipation, PD -- W 1.0 M ou nt 0.8 ed on ac er am 0.6 ic bo ar d( 0.4 90 0m m2 ! 0.8 0.2 m m ) 0 0 20 40 60 80 100 120 140 160 Ambient Temperature, Ta -- C IT05486 No.7368-3/4 CPH3323 Note on usage : Since the CPH3323 is designed for high-speed switching applications, please avoid using this device in the vicinity of highly charged objects. Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2004. Specifications and information herein are subject to change without notice. PS No.7368-4/4 |
Price & Availability of CPH3323
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |